TUNGSTON CARBIDE FLAT SPRAY TIP

TUNGSTON CARBIDE FLAT SPRAY TIP

Characteristics:

All “TC” flat spray tips utilize high quality tungsten carbide inserts, which provide maximum resistance to abrasion, while still providing uniform spray distribution. All TC tips are laser-marked, custom marking may be available upon request.

How to order:

Example: TC Tip with the following specifications: flowrate 1.14 gpm@1,450 psi. Spray angle: 110º, Orifice diameter: 0.91 mm

The tip is constructed in 303 stainless steel, with a tungsten carbide orifice insert. Flow rates in the below table are based on a liquid pressure of 1,450 psi. Please contact our Amerispray office or your local representative if assistance is needed in nozzle selection.